Re: Help replacing side lamps on NSM Performer wall mount

Thanks To Mark Miller (in MN) for telling me how to do this the "easy" way.
For the record..
1) Unscrew and remove the plastic caps at the bottom of the siderails
    on the door.
2) (optional?) Unscrew and remove the chrome trim from the bottom of the
    siderail of the door.
3) Remove the screw from the inside of the door about 2/3 of the way up
    that holds the lamp in place.
4) Detach the wires going into the top of the siderail on the door from
    the terminal block (4 of them per).
5) Detach the ground wire from the lug on the door.
6) tape the loose wires together and then attach a piece of string to
    the end of the wire bundle.
7) carefully pull the lamp and mount out from the bottom of the door
    while guiding the wire bundle through the top.
8) replace the bulb.
9) Slide the bulb assy back into the track in the door. You will need
    to be careful you have it in the track properly or it won't go in all
    the way.
10) Use the string on the end of the wire bundle to help pull the wires
     and lamp back into place.
11) Clean averything.
12) reverse steps 5-1.

If you do one side at a time you will be able to use the other as a
refence.

cheers
/Tim
Tim Iskander wrote:
> I just got an NSM Performer wall mount CD juke and I'm having a devil
> of a time
> tyring to figure out how to change the bulbs up the side of the door.
> It looks like
> you have to disassemble 1/2 the door to get to them. I hoping I'm
> missing something
> here, is there an easier way to get at them?
> 
> thanks
> /Tim